Telescopic swimming pool Enclosure CUSTOM MADE - ATYPICAL

Upon your request we can manufacture even non-standard atypical enclosures.

Questions? Talk To Us!

We are here to help you to choose the solution that fits your needs.

Contact Us  

Basic Information

Custom made

We approach custom-made enclosures individually. They are used when a swimming pool of an atypical shape, size or location has to be covered. This category also includes roofing for hotel gardens and restaurants as well as for terraces.

  • smoking lounges
  • lean on wall enclosures
  • conservatories
  • bus stops, bus shelters
  • glasshouses
  • pergolas


Technical enclosure details

M profiles

Lightest profiles used exclusively on enclosures designed for snow-free areas and for Klasik Spa.
Cross-section 40 × 55 mm.

L profiles

Profiles for enclosures of medium size and SKYTRIUMS. Visually identical with M profiles, but structurally reinforced.
Cross-section 40 × 55 mm.

L+ profiles

Profiles for larger enclosures. Compared to series L, the medium profile is extended.
Cross-section 40 × 55 mm. and 40 × 72mm.

XL profiles

A series of profiles for the biggest enclosures, with an emphasis on uncompromising durability.
Cross-section 73 × 55 mm.




Suitable also for enclosures of M, L and L+ profiles and for SKYTRIUMS. A unique solution with hidden anchoring screws. Option for enclosures with low and high impact angles.
Height 20 mm, span 70 mm.

Standard 110 mm

Designed for enclosures made of XL profiles, with a good tolerance for minor subgrade unevenness.

Height 25 mm, span 110 mm.

Wall-mounted rails

Designed for lean on wall enclosures and terrace roofing. Each rail is also used as a water board for excellent rain water drainage.


Roofing material

Twin wall polycarbonate


We use twin wall polycarbonate 8mm thick (S, M and L profiles) and 10mm thick (XL profiles). This roofing material features extreme resistance and high insulating capacity. Of course, it also provides UV protection. We offer a choice of 4 colour shades and the new Hammer finish!

Twin wall polycarbonate color clear
Twin wall polycarbonate color smoky
Twin wall polycarbonate color blue
Twin wall polycarbonate color green
Twin wall polycarbonate color hammer finish
Hammer finish

Compact polycarbonate


As a standard we use compact polycarbonate 4 mm thick. For the side walls of terrace roofing the material is 6 mm thick. This roofing material offers an elegant feel and excellent transparency. Of course, it also provides UV protection. We offer a choice of 4 colour shades.

Compact polycarbonate color clear
Compact polycarbonate color smoky
Compact polycarbonate color blue
Compact polycarbonate color green

Safety glass


We use this roofing material for SKYTRIUMS - 6 mm thick for side, front and end panels and 10 mm thick for sliding panels. You will appreciate its extreme strength, insulating properties and high resistance to scratching. Only the clear design is available.

Compact polycarbonate color clear

Color of profiles

The colours for standard enclosures are fixed, while custom enclosures come with the following portfolio of colours:

Category 1

Silver Elox
Silver Elox
White RAL 9016
White RAL 9016
Metallic grey DB703
Metallic grey DB703

Category 2

Green RAL 6005
Green RAL 6005
Golden oak
Golden oak
Grey RAL 7016
Grey RAL 7016

Category 3

All other colours as per the valid ALBIXON sample card.


Enclosure details

Front and back panels

  • Fixed
  • Removable

The front and back panels of the enclosure can be fixed with screws or attached removably using a panel screw. We recommend removable panels if the enclosure cannot be fully slid out of the swimming pool area and you commonly swim under it. The removable panel can be fitted with lockable panel screws. Depending on the size, the panel can be made as a single piece or in multiple pieces.

Elevated bottom panel edges


This detail facilitates smooth movement of the enclosure for example over an elevated pool border. We offer an elevation of the bottom panel edge, covered by a durable canvas, up to 18 cm. If the elevation is higher, the sealing of the enclosure will be impaired.



The bottom segment of the enclosure panels can be swung upward for easy movement of the structure over obstacles, such as steps or a diving platform. The maximum height of clapper is up to half the height of the front/back panel. ATTENTION! Sliding door cannot be mounted in panels with a clapper. Hinged door are possible but need to be unhinged before the clapper is opened. We always recommend consulting the use of a clapper.

Side entrance


It is usually located on the biggest module. Installation on the smallest module is also possible, but the enclosure's minimum height then increases by 10 cm. We are the only company on the market offering an optional side entrance on any module of the terrace roofings. Of course, the side entrance is lockable.

Doors in front/back panels

  • Hinged (left, right)
  • Sliding (lift, right)
  • Double-wing (hinged, sliding)

They can be hinged or sliding. The standard width is 80 cm for single-wing and 120 cm for double-wing doors. If the required door width exceeds 90 cm and 140 cm for single-door and double-wing doors, respectively, we recommend using the sliding variant for better resistance. We also recommend sliding doors for higher enclosures. We do not recommend a door in the front/back panel of the Casablanca Infinity enclosure. If a hinged door is positioned off-centre, the hinges need to be placed on the side of the door closer to the axis. Of course, all door types are lockable.


  • Non-lockable
  • Lockable

As a standard, each module is supplied with two stoppers in its open/close position. For even higher safety, the stoppers can be lockable. As a standard, stoppers are installed with access from outside, except for the smallest module, where they are ready for access from inside and are not lockable - if someone is locked under the enclosure, he can easily get out.

Module length


The enclosure modules have a standard length of 219 cm, unless specified otherwise. The recommended module length ranges between 180 and 250 cm. We do not recommend other values to preserve smooth enclosure movement. For the Casablanca Infinity enclosure we recommend only standard-length modules. If the length is increased, it may be necessary to add supporting arches to maintain the certified loading capacity.


Certificates & Guarantees

This website uses cookies to improve your user experience. Read More