Pool and cover - perfect match
If you are thinking about a low enclosure and prefer rounded shapes and smooth curves, Dallas is the best solution for you. Its standard rails, side entrance, top-quality insulating roofing material and removable front panel guarantee simple functionality in any situation. Choose from one of two sizes and colours and in 7 days you will enjoy this enclosure in your garden!
We approach custom-made enclosures individually. They are used when a swimming pool of an atypical shape, size or location has to be covered. This category also includes roofing for hotel gardens and restaurants as well as for terraces.
These are suitable for medium size enclosures. THey have the same appearance as M profiles, but are structurally reinforced.
Cross-section 40 × 55 mm.
Profiles used for bigger enclosures. The middle profile is wider compared to the L version.
Cross-section 40 × 55 mm. and 40 × 72mm.
Suitable also for enclosures of M, L and L+ profiles. This represents a unique solution with anchoring screws. We offer options for enclosures with low and high impact angles.
Height 20 mm, axial distance 70 mm.
Twin wall polycarbonate
We use twin wall polycarbonate 8mm thick (S, M and L profiles). This roofing material features extreme resistance and high insulating capacity. Of course, it also provides UV protection. We offer a choice of 4 colour shades and the new Hammer finish!
Compact polycarbonate
As a standard we use compact polycarbonate 4 mm thick. For the side walls of terrace roofing the material is 6 mm thick. This roofing material offers an elegant feel and excellent transparency. Of course, it also provides UV protection. We offer a choice of 4 colour shades.
The colours for standard enclosures are fixed, while custom enclosures come with the following portfolio of colours:
Category 1
Category 2
Category 3
Front and back panels
The front and back panels of the enclosure can be fixed with screws or attached removably using a panel screw. We recommend removable panels if the enclosure cannot be fully slid out of the swimming pool area and you commonly swim under it. The removable panel can be fitted with lockable panel screws. Depending on the size, the panel can be made as a single piece or in multiple pieces.
Elevated bottom panel edges
This detail facilitates smooth movement of the enclosure for example over an elevated pool border. We offer an elevation of the bottom panel edge, covered by a durable canvas, up to 18 cm. If the elevation is higher, the sealing of the enclosure will be impaired.
Clapper
The bottom segment of the enclosure panels can be swung upward for easy movement of the structure over obstacles, such as steps or a diving platform. The maximum height of clapper is up to half the height of the front/back panel. ATTENTION! Sliding door cannot be mounted in panels with a clapper. Hinged door are possible but need to be unhinged before the clapper is opened. We always recommend consulting the use of a clapper.
Side entrance
It is located on the biggest module. We are the only company on the market offering an optional side entrance on any module of the terrace roofings. Of course, the side entrance is lockable.
Doors in front/back panels
They can be hinged or sliding. The standard width is 80 cm for single-wing and 120 cm for double-wing doors. If the required door width exceeds 90 cm and 140 cm for single-door and double-wing doors, respectively, we recommend using the sliding variant for better resistance. We also recommend sliding doors for higher enclosures. We do not recommend a door in the front/back panel of the Casablanca Infinity enclosure. If a hinged door is positioned off-centre, the hinges need to be placed on the side of the door closer to the axis. Of course, all door types are lockable.
Stopppers
As a standard, each module is supplied with two stoppers in its open/close position. For even higher safety, the stoppers can be lockable. As a standard, stoppers are installed with access from outside, except for the smallest module, where they are ready for access from inside and are not lockable - if someone is locked under the enclosure, he can easily get out.
Module length
The enclosure modules have a standard length of 219 cm, unless specified otherwise. The recommended module length ranges between 180 and 250 cm. We do not recommend other values to preserve smooth enclosure movement. For the Casablanca Infinity enclosure we recommend only standard-length modules. If the length is increased, it may be necessary to add supporting arches to maintain the certified loading capacity.
| Technical details | Dallas A *Dallas Clear A |
Dallas B *Dallas Clear B |
|---|---|---|
| Maximum enclosed area | 365 x 635 cm | 464 x 850 cm |
| Outer width "B" | 407 cm | 520 cm |
| Inner width "A" | 379 cm | 478 cm |
| Outer lenght "E" | 646 cm | 860 cm |
| Outer height "V" | 82 cm | 100 cm |
| Package size | 445 x 48 x 127 cm | 561 x 55 x 127 cm |
| Package weight | 310 kg *420 kg |
480 kg *650 kg |
| Installation time | approx. 3h/3 persons *approx. 4h/3 persons |
approx. 4h/3 persons *approx. 6h/3 persons |
If the sizes above do not suit your needs, we recommend the Dallas custom design ("Custom sizes").
Key benefits of Albixon Box:
| Possible enclosure sizes | |
|---|---|
| Width "B" | 300 to 600 cm |
| Height "V" | 61 to 121 cm |
| Lenght "E" | unlimited |
to move the enclosure beyond the swimming pool area.
for the most cost-effective swimming pool heating.
